Contact your local Vilex sales representative

Vilex Foot Plates &
Cannulated Compression Screws

Foot Plating System

Locking and Non-Locking Plates for Forefoot, Midfoot, and Rearfoot Surgery

Foot Plates
Vilex-Foot-Plates

Vilex offers a wide range of locking and non-locking fixation plates for fracture, fusion, and osteotomy.

Most Vilex paltes:

  • Have multiple uses
  • Are not procedure specific
  • Are capable of providing mechanical compression
  • May be used with locking or lag screws, either solid or cannulated

Plates with mechanical compression capability utilize a uniquely designed tapered hole to cause movement of one bone fragment towards the other when the screw is tightened, thus compressing the surgical site.

  • Straight Plates
  • T-Plates, Y-Plates, L-Plates (left & right)
  • Tabular Plates
  • Midfoot plates
  • Open Base Wedge Plate

MTP Plate

  • Low profile plate thickness
  • Anatomically contoured with right and left version
  • Multiple lengths for various bone size: 45mm and 54mm lengths
  • Cup and cone reamer for joint resurfacing
  • 3.0mm or 3.5mm solid locking or non-locking screws
  • Double ended revision options
MTP_Plate
MTP_Plate

Lapidus Plate

  • Low profile plate thickness
  • Utility slot designed to allow cross screw positioned at arthrodesis
  • 3.0mm or 3.5mm solid locking or non-locking screws
  • Medial placement
Lapidus_Plate
Lapidus_Plate
Lapidus_Plate

Open Base Wedge Plate

Open Base Wedge Plate

Features

  • Procedure specific plate system
  • Four implant sizes (3, 4, 5 or 6mm wedge options)
  • Available as locking or non-locking
  • Locking (gold plate): 3.0mm locking or non-locking screws
  • Non-locking (blue plate): 2.5mm titanium solid
  • Screws available in lengths from 10-30mm (2mm increments)
  • Stainless steel trial sizers

Cannulated Compression Screws

Titanex

The Titanex I Cannulated Screw System is a premiere implant and delivery system available in 2.0mm, 3.0mm, and 4.0mm sizes.

Titanex

Titanex — Titanium

Small Cannulated Screw System

Titanex Tray

Titanex is a fully modular, next generation titanium implant system available in 2.0, 3.0, and 4.0 millimeter sizes.

Hand Sharpened

Optimized Thread Lengths

Stronger Guide Wire

Titanex implants are self-drilling and self-tapping fixation devices featuring individually hand-sharpened cutting tips offering the renowned bite and engagement of Vilex screws.

Optimized thread lengths are designed to enable proper thread placement across osteotomies.

Reverse cutting flutes facilitate easier implant removal.

Titanium implants are designed with low profile heads to minimize soft-tissue irritation while offering maximum compression.

3.0mm and 4.0mm accept 1.4mm guide wires offering greater stiffness and reducing bent wires in surgery.

Titanex Features

Hexalobe Drive

Titanex implants utilize a hexalobe drive mechanism for greater torque control providing improved driver engagement versus competing implants.

Higher torque may be beneficial when encountering hard bone. Drive mechanism designed to reduce wear on driver.

Implant-Specific, Color-coded Instrumentation

Each implant size has color-coded instrumentation for intraoperative identification.

Countersinks are designed to precisely match implant heads.

Surgeons have the option of ratcheting or non-ratcheting handles.

Titanex Instruments
Titanex Tray System

Titanex Tray System

System features a modular caddy tray design. Tray construction includes a universal components caddy and three self-contained color-coded implant specific instrumentation caddies in one sterilization tray.

Small Headless

Dual thread headless compression screws are available in 2.0mm, 2.5mm, 3.0mm, and 4.2mm sizes

Small Headless

Small Headless Compression Screws — Titanium

Small Cannulated Screw System

Small Headless Screw

Dual thread headless compression screws are available in 2.0mm, 2.5mm, 3.0mm, and 4.2mm sizes

Hand Sharpened Cutting Tips

Dual Thread Compression

Unparalleled Bite

Headless screws feature dual threads to provide enhanced compression

All screws are self-drilling and self-tapping, featuring individually hand-sharpened cutting tips offering the renowned bite and engagement of Vilex screws.

  • Pitch ratio offers optimized compression for fixation
  • Cancellous and cortical bone threads provide stable fixation, increased pull out strength, and compression
  • Cannulated headless titanium implants with Hex head offer precise placement
  • Headless feature designed to reduce irritation of soft tissue and articulating surfaces in hand and foot
Forefoot+Surgery+Hammertoe+Headless+Screw+and+Staple
X-Ray-Lapidus+Arthrodesis+Vilex+Headless+Screw

Screw Sizes

2.0mm: lengths from 6-50mm: 1mm increments from 6-30mm, 2mm increments  30-40mm, 45mm, and 50mm

2.5mm: lengths from 10-24mm

3.0mm: lengths from 10-44mm and specialized short threads

4.2mm: lengths from 16-60mm

Small Fragment

The widest variety of lag screws: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5mm in Stainless and Titanium, and Fully Threaded Screws

Small Fragment

Small Fragment Screws — Titanium & Stainless

Small Cannulated Screw System

Lag & Fully Threaded

Cannulated-Headless-Screw_on_k-wire

All screws are self-drilling and self-tapping, featuring individually hand-sharpened cutting tips offering the renowned bite and engagement of Vilex screws.

Lag effect provides internal compression and stabilization of osteotomies

Pioneer of the 2.0mm cannulated screw for foot and hand surgery

Vilex Consignment Program offers financial flexibility for ASCs and Hosptials and no purchase commitment

Stainless Lag Screws

2.0mm: lengths from 6-24mm and 36mm with 0.9mm cannulation, in 1mm increments

2.5mm: lengths from 6-44mm with 0.9mm cannulation and 6-30mm with 1.1mm cannulation

3.0mm: lengths from 6-44mm with 1.1mm cannulation

3.5mm: lengths from 10-50mm in 2mm increments

4.0mm: lengths from 20-55mm with 1.1mm cannulation and 20-60mm with 1.4mm cannulation

4.5mm: lengths from 20-60mm with 1.6mm cannulation

Stainless Fully Threaded Screws

2.5mm: lengths from 14-22mm with 1.1mm cannulation

3.0mm: lengths from 14-22mm with 1.1mm cannulation

Titanium Lag Screws

2.0mm: lengths from 6-50mm with 0.9mm cannulation, most available in 1mm increments

2.5mm: lengths from and 6-30mm with 0.9mm cannulation, in 1mm increments

3.0mm: lengths from 8-40mm with 1.1mm cannulation

3.5mm: lengths from 10-50mm with 1.1mm cannulation, in 2mm increments

4.0mm: lengths from 20-60mm with 1.1mm cannulation, in 2mm increments

4.5mm: lengths from 20-60mm with 1.6mm cannulation

Small Fragment Tray

Large Fragment

Lag and Headless Implants in 5.0mm, 6.5mm, 7.2mm, 8.0mm diameters

Large Fragment

Large Fragment — Titanium & Stainless

Large Cannulated Screw System

Vilex+Large+Frag+Screw_5.0_6.5_7.2_8.0_triple_subtalar_arthrodesis_fusion_foot_ankle

Lag and Headless Implants in 5.0mm, 6.5mm, 7.2mm, 8.0mm diameters.

Designed with aggressive threads and large pitch differential to enhance compression and maximize pull-out strength.

Hand-sharpened cutting tips offer unparalleled bite.

Features and Benefits

Titanium implants offer strength and biocompatibility

Implant specific countersinks and drills with standardized power connections in compact tray

Modular tray system for customized tray configuration of lag and headless implants and thread length options

Large diameter guide-wires increase wire stiffness, reducing bending and improving implant positioning

Short and long threads options designed to maximize compression for each implant and indication

Significant pitch differential provides compression in headless screws

Self-tapping, self-drilling, and individually hand-sharpened triple cutting tip

Titanex Features
Titanex Features
Titanex Features

Resources

Sales

Contact your local Vilex sales representative

Subscribe

To sign up with your email address to receive product and event news and updates, visit the Vilex website

Vilex Contact Form

To contact Vilex, visit their website